Emulex EMULEX manual Parmget label, Gets the value of a specified parameter in the driver

dynamic: no

desc: Select Fibre Channel topology

-----------------------------------------------------------------

label: link-speed min: 0

current: 0 max: 4 default: 0 dynamic: no

desc: Select link speed

-----------------------------------------------------------------

label: num-nodes min: 2

current: 512 max: 512 default: 512 dynamic: no

desc: Number of fibre channel nodes (NPorts) the driver will support.

-----------------------------------------------------------------

label: cr-delay min: 0

current: 0 max: 63 default: 0 dynamic: no

desc: A count of milliseconds after which an interrupt response is generated

-----------------------------------------------------------------

label: cr-count min: 1

current: 1 max: 255

default: 1

dynamic: no

desc: A count of I/O completions after which an interrupt response is generated

-----------------------------------------------------------------

label: assign-alpa min: 0x0

current: 0x0 max: 0xef

default: 0x0

dynamic: no

desc: Assigns a preferred ALPA to the port. Only used in Loop topology.

-----------------------------------------------------------------

label: adisc-support min: 0

current: 1 max: 2 default: 1

dynamic: yes

desc: Sets the Fibre Channel ADISC login support level.

-----------------------------------------------------------------

label: pm-support min: 0

current: 1 max: 1 default: 1 dynamic: no

desc: Enables power management support.

parm_get <label>

Gets the value of a specified parameter in the driver.

FCA Utilities Reference Manual Page 19