#
This mode of operation enables you to use the emlxdrv utility as part of a script or another program capable of executing
Command Descriptions (emlxdrv)
This section provides a list of commands that can be issued with the emlxdrv utility program. You can view the list of commands at any time by running the emlxdrv utility in interactive mode (see Interactive Mode (emlxdrv) on page 26).
set_emlxs <alias>
Sets the emlxs driver to bind to the specified devices. You must specify one of the valid adapter aliases listed on the screen. Note that each alias is shared by multiple adapter models. Driver bindings can be made only with an adapter alias and not with a specific adapter model.
You may see the message "Cannot unload module". This indicates that you must reboot the system to get a driver to unbind from that adapter alias; emlxdrv only updates the system configuration for the next boot.
Example:
emlxdrv> set_emlxs f980
Updating f980 ...
Cannot unload module: lpfc
Will be unloaded upon reboot.
Done.
set_emlxs_sun
Sets the emlxs driver to bind to all Sun devices.
Example:
emlxdrv> set_emlxs_sun
Updating fc00 ...
Done.
set_emlxs_all
Sets the emlxs driver to bind to all devices. You may see the message "Cannot unload module". This indicates that you must reboot the system to get a driver to unbind from that adapter alias; emlxdrv only updates the system configuration for the next boot.
Example:
emlxdrv> set_emlxs_all
Updating lpfs ...
Updating f800 ...
Updating f900 ...
Cannot unload module: lpfc
Will be unloaded upon reboot.
Updating f980 ...
Cannot unload module: lpfc
Will be unloaded upon reboot.
Updating fa00 ...
Updating fd00 ...
FCA Utilities Reference Manual | Page 28 |
