Updating fe00 ...
Updating fc00 ...
Done.
set_lpfc <alias>
Sets the lpfc driver to bind to the specified devices. You must specify one of the valid adapter aliases listed on the screen. Each alias is shared by multiple adapter models. Driver bindings can be made only with an adapter alias and not with a specific adapter model.
You may see the message "Cannot unload module". This indicates that you must reboot the system to get a driver to unbind from that adapter alias; emlxdrv only updates the system configuration for the next boot.
Example:
emlxdrv> set_lpfc fa00
Updating fa00 ...
Cannot unload module: emlxs
Will be unloaded upon reboot.
Done.
set_lpfc_nonsun
Sets the lpfc driver to bind to all
Example:
emlxdrv> set_lpfc_nonsun
Updating lpfs ...
Updating f800 ...
Updating f900 ...
Updating f980 ...
Updating fa00 ...
Cannot unload module: emlxs
Will be unloaded upon reboot.
Updating fd00 ...
Updating fe00 ...
Done.
clear_dev <alias>
Clears driver binding to the specified devices. You must specify one of the adapter aliases listed on the screen. Each alias is shared by multiple adapter models. Driver bindings can be made only with an adapter alias and not with a specific adapter model.
You may see the message "Cannot unload module". This indicates that you must reboot the system to get a driver to unbind from that adapter alias; emlxdrv only updates the system configuration for the next boot.
Example:
emlxdrv> clear_dev fe00
Updating fe00 ...
Cannot unload module: emlxs
Will be unloaded upon reboot.
Done.
FCA Utilities Reference Manual | Page 29 |
