3-10 Chapter 3
Add the Printer
From the PRINTER SERVER INFORMATION menu:
1) Select PRINTERS.
2) Press INSERT.
3) Enter the Emulex default server name.
The Emulex default server name is defined in the Before Installation
section in the front of this chapter.
4) Select the newly defined printer.
5) Press ENTER.
Select the Print Queue
From the PRINTER CONFIGURATION menu:
1) Select PRINTER TYPE.
2) Press ENTER.
This will change the printer from Parallel to Other/Unknown.
3) Select PRINT QUEUES ASSIGNED.
4) Press ENTER.
5) Press INSERT to assign a print queue to this printer.
6) Press ESC.
7) Press F10 to save the changes.
Restart the Printer Server
The following procedure allows the printer server to read the new
configuration in the file server’s bindery. Recycling power on the Emulex
printer server will also accomplish the same discovery.
From the PRINTER SERVER INFORMATION menu:
1) Select INFORMATION AND STATUS.
2) Verify current server status is running and highlighted.
Press ENTER to bring down the printer server.
3) Exit PCONSOLE.