8-18 Chapter 8
The following is an example of a server command script. This command
configures a new service name (for example, 1j4a), for remote printing
on a printer server serial port. It uses TCP port 3001 and configures the
port’s baud rate to 19200.
> access
> set type softcopy
> set privilege
> system
> change service 1j4a 3001 telnet disabled port 2
> change port 1 access remote speed 19200
> logout
2) Save the script with the name SERVCNFG.SCR.
3) Create an icon called TELRCF IP_address
In the parameters field, enter:
> -h IP_address -f \emulex\servcnfg.scr
IP_address The IP address
emulex The directory containing the file
4) To send the file, double-click the icon labeled TELRCFip_address.
The file is sent and TELRCF terminates when completed.