Windows NT 9-3
Without DHCP 1) Login to the Emulex printer server.
Refer to the Remote Login or Local Login section later in this chapter.
2) Enter:
> Server>> define node ip ip_address
ip_address The IP address of the designated node in decimal
dot notation. For example, 123.234.345.490
Installation
Any Windows NT computer can be used to created a TCP/IP printer if
TCP/IP is installed with printing support. Follow the steps below to
configure a Windows NT computer for TCP/IP printing.
In the CONTROL PANEL:
1) Select NETWORK option.
This opens the NETWORK SETTINGS dialog box.
2) Click ADD SOFTWARE button.
This displays the ADD NETWORK SOFTWARE dialog box.
3) Select TCP/IP Protocol and Related Components.
4) Click CONTINUE.
This opens the WINDOWS NT TCP/IP INSTALLATION OPTIONS dialog
box.
5) Check TCP/IP NETWORK PRINTING SUPPORT.
If TCP/IP is not already installed on this computer, check the other
desired options as described in the Windows NT System Guide.
6) Click OK.
7) Enter the full path to the Windows NT distribution files.
8) Click CONTINUE.
All necessary files are copied to the hard disk.