Energy Tech Laboratories VEC1029FPOB user manual Using The Detachable Hand-Crank Led Flashlight

VEC1029FPOB_ManualEN_101606 10/16/06 5:17 PM Page 11

NWR and the Emergency Alert System (EAS) use the same digital protocols, and NWR is the primary means for NWS alerts to activate the EAS. The Federal Communications Commission (FCC) amended the EAS rules in 2002 and adopted numerous codes. NWS introduced the new codes on June 30, 2004. Log onto https://www.weather.gov/os/eas_codes.shtml for a complete listing of EAS Event (NWR-SAME) Codes if your receiver is equipped with Digital SAME Technology.

USING THE DETACHABLE HAND-CRANK LED FLASHLIGHT

The VEC1029POB also comes with a detachable Hand-Crank LED Flashlight. Features include:

•3 long-life, ultra bright beam LED lights

•Powered by a flip-up, dynamo hand crank (no need to buy batteries)

LED SELECTION

PUSHBUTTON

DYNAMO HAND CRANK	3 LED LIGHTS
(UNDERSIDE OF UNIT)

Charge the LED Flashlight by opening (flipping up) the dynamo hand-crank’s handle (located on the underside of the flashlight) and hand cranking in a clockwise direction at a rate of one to two rotations per second (for optimal charging).

Approximately one minute of hand cranking will yield up to 30 minutes of runtime at the single LED setting or up to 10 minutes of runtime at the 3-LED setting.

The Flashlight’s ON/OFF function and LED settings are controlled by the LED Selection pushbutton on the top of the Flashlight as follows:

•Depress the LED Selection Pushbutton for the single LED setting (one LED will light).

•Depress the LED Selection Pushbutton a second time for the 3-LED setting.

•Depress the LED Selection Pushbutton a third time to switch the LED Flashlight OFF.

CARE AND MAINTENANCE

Replacement Parts

For replacement parts (batteries, fuses, adapters, etc.), contact Customer Service, toll-free, at (800) 544-6986.

CAUTION

If the cord, wires, or cables become damaged, return the entire unit to Power On Board immediately for service/repair.

11