VEC1029FPOB_ManualEN_101606 10/16/06 5:17 PM Page 6

120 Volt AC Charging using a Common Household Extension Cord (not included)

1.Lift the AC Charger cover located on the back of the Power Center and connect a standard household extension cord to the unit. Plug the other end of the cord into a standard North American 120 volt AC wall outlet.

2.Charge until three Red and one Green LEDs light.

3.Once fully charged, disconnect the extension cord.

Note: The unit cannot be overcharged using this method.

12 Volt DC Charging

The 12 Volt DC recharging method will NOT recharge the unit as effectively as recharging from 120 volt AC. The 12 volt DC recharging procedure is recommended only when it is necessary, since frequent use of the 12 volt DC recharging procedure may shorten the battery system’s life.

1.Insert the gold-tipped DC Charging Adapter end plug into the vehicle’s 12 volt DC accessory outlet.

2.Insert the silver-tipped end plug into the 12 Volt DC Outlet on the front panel of the unit.

3.To check the charge status of the battery during DC charging, disconnect the DC adapter from the accessory outlet and push the Battery Charge Level pushbutton. Observe the battery charge indicator.

4.When charging is complete, remove the power cord.

WARNING

Do not recharge for more than 5 to 6 hours maximum using the 12 volt DC method.

USING THE 12 VOLT DC PORTABLE POWER SUPPLY

1.Flip open the 12 Volt DC Outlet cover on the upper right side of the unit.

2.Insert the 12 volt DC plug from the appliance (cell phone charger, etc.) into the outlet.

3.Turn on the appliance and operate normally.

Make sure to disconnect all appliances from the 12 Volt DC Outlet when the unit is being recharged or stored.

CAUTION

DO NOT USE UNIT TO POWER APPLIANCES THAT DRAW MORE THAN 5 AMPS DC.

6

Page 6 Page 8
Page 7
Image 7
Energy Tech Laboratories VEC1029FPOB user manual Using the 12 Volt DC Portable Power Supply, Volt DC Charging
Page 6 Page 8

VEC1029FPOB specifications

Energy Tech Laboratories has taken a significant leap in renewable energy solutions with the introduction of the VEC1029FPOB, a cutting-edge power optimization device designed for a range of applications from residential to commercial energy systems. This innovative technology focuses on maximizing efficiency and harnessing renewable energy sources, thus positioning itself at the forefront of the energy tech landscape.

The VEC1029FPOB boasts several key features that set it apart from traditional energy devices. One of its main characteristics is its sophisticated energy management system, which integrates seamlessly with solar panels, wind turbines, and various energy storage solutions. Users can monitor and manage their energy consumption in real-time, ensuring optimal performance and reduced energy costs.

At the heart of the VEC1029FPOB is its advanced adaptive load management technology. This allows the device to automatically adjust power distribution according to demand, effectively preventing energy wastage. By intelligently allocating energy where it's needed most, the VEC1029FPOB not only enhances efficiency but also extends the lifespan of connected devices and appliances.

Another remarkable feature of the VEC1029FPOB is its ability to operate in off-grid situations. Equipped with a robust energy storage solution, this device can store excess energy generated by renewable sources for later use. Whether in urban settings or remote locations, users can rely on the VEC1029FPOB for a consistent and autonomous power supply.

Moreover, the VEC1029FPOB is designed with user convenience in mind. Its intuitive interface and mobile app integration allow for easy configuration and monitoring from anywhere. This user-centric approach ensures that both tech-savvy individuals and those new to energy management can utilize its features without difficulty.

The VEC1029FPOB’s commitment to sustainability is evident not only in its operational capabilities but also in its environmentally friendly design. Built with recyclable materials and following strict energy-efficient guidelines, this device reflects Energy Tech Laboratories' dedication to promoting sustainable practices.

In summary, the Energy Tech Laboratories VEC1029FPOB stands out as a versatile power optimization solution that combines innovation, efficiency, and user-friendliness. With its advanced features, including adaptive load management, off-grid capabilities, and a focus on sustainability, the VEC1029FPOB is poised to revolutionize the way we approach energy management in our homes and businesses.
Top Page Image Contents