Sanyo ECJ-E35S How To Set The Clock, Power Failure While The Unit Is In Operation, During Cooking

Models: ECJ-E35S

1 19
Download 19 pages 36.47 Kb
Page 8
Image 8
HOW TO SET THE CLOCK

HOW TO SET THE CLOCK

The time shown on the appliance’s clock has been preset to standard time.

Set the clock according to the following procedure if the time becomes incorrect due to room temperature or other reason.

The clock cannot be set while the timer is being used for cooking or warming.

The current operation can be canceled by pressing the KEEP WARM/OFF button.

Be sure to set the clock to the correct time because timed cooking will not function properly if the time is incorrect.

EXAMPLE: When the current time is 8:00am, but the display shows 7:55am.

1Plug in the power supply plug.

2Press the HRS or MIN button until the time display begins to flash.

3Press HRS and MIN to set the correct time.

HRS

MIN

The time display will begin to flash.

THE BUILT-IN LITHIUM BATTERY

HRS

MIN

Press HRS to set “8”. Press MIN to set “00”.

Holding down the buttons will allow the display to fast forward.

The clock display will stop flashing after 6 seconds.

The time setting completes when the clock display stops flashing.

The appliance’s internal lithium battery provides power to retain the time display and the timer setting, even when the power supply plug has been disconnected.

The battery life expectancy is 4-5 years at a room temperature of 68˚F/20˚C. The battery may last longer when the appliance is plugged into the wall outlet because the battery power is not consumed.

When the battery begins reaching the end of its life, the display will appear weaker and the timer setting will not be maintained while the appliance is unplugged. When the battery weakens, the appliance can still be used as usual as long as it is plugged in.

A replacement battery can be purchased at the store where your appliance was purchased or visit www.sanyoservice.com.

POWER FAILURE WHILE THE UNIT IS IN OPERATION

(Information given in this section includes times during operation when the plug is pulled or a circuit breaker goes out.)

If the power fails momentarily, the appliance will return to the same mode it was in prior to the failure.

In the event of a longer power outage, the following will occur once power is restored:.

During Timer Operation

During Cooking

While Rice is being Kept Warm

 

 

 

• The appliance will immediately

• Cooking will continue, however,

• The appliance will continue to

begin cooking if the time has

the rice may not be cooked

keep the rice warm.

passed the cooking start time.

properly.

 

• The rice may not be cooked by

• If a little cooking time remains,

 

the exact time programmed in

the appliance may switch to the

 

the timer.

KEEP WARM mode.

 

 

 

 

8

Page 8
Image 8
Sanyo ECJ-E35S How To Set The Clock, Power Failure While The Unit Is In Operation, 1Plug in the power supply plug