![](/images/new-backgrounds/1209052/20905221x1.webp)
MOUNTING AN LVC BOX TO THE CABINET
SINGLE PHASE (MODELS
NOTE: The single phase LVC box comes with a connected power cord. The
NOTE: Attach both the single phase model and the
1.Loosen, but do not remove the three screws (A) Fig. 1 on the back of the LVC box.
A
Fig. 7A
2.Insert the power cord (single phase only) through the hole (C) Fig. 2 from inside the cabinet.
3.Insert the three screws on the back of the LVC box
(A) Fig. 1 into the three holes (B) Fig. 2 on the inside of the cabinet. Push down on the box to engage the screws in the slots to secure the box.
4.Tighten the three screws (A) Fig. 3 from the outside of the cabinet to hold the LVC box in place.
B
C
Fig. 7B
A
Fig. 7C
11