EnGenius Technologies 28-248 instruction manual

INSTRUCTION MANUAL

PART NO. 426-02-651-0055 - 08-26-05 - Rev. A

To learn more about DELTA MACHINERY

visit our website at: www.deltamachinery.com.

For Parts, Service, Warranty or other Assistance,

please call 1-800-223-7278 (In Canada call 1-800-463-3582).

14" Wood Cutting Band Saw

(Model 28-248)

(Model 28-475X)

Contents

Main INSTRUCTION MANUAL 14" Wood Cutting Band Saw IMPORTANT SAFETY INSTRUCTIONS TABLE OF CONTENTS SAFETY GUIDELINES - DEFINITIONS CALIFORNIA PROPOSITION 65 GENERAL SAFETY RULES ADDITIONAL SPECIFIC SAFETY RULES SAVE THESE INSTRUCTIONS. Refer to them often and use them to instruct others. POWER CONNECTIONS MOTOR SPECIFICATIONS GROUNDING INSTRUCTIONS EXTENSION CORDS MINIMUM GAUGE EXTENSION CORD FUNCTIONAL DESCRIPTION FOREWORD UNPACKING AND CLEANING CARTON CONTENTS ASSEMBLY ASSEMBLY TOOLS REQUIRED ASSEMBLY TIME ESTIMATE ATTACHING THE MOTOR BRACKET TO THE STAND ATTACHING THE MOTOR TO THE MOTOR BRACKET ATTACHING THE TOP PLATE TO THE STAND SINGLE PHASE (MODELS 28-248F & 28-348F) & THREE PHASE MOUNTING AN LVC BOX TO THE CABINET INSTALLING THE DUST CHUTE THE BAND SAW USED WITH A DUST COLLECTOR THE BAND SAW USED WITHOUT A DUST COLLECTOR ATTACHING THE DOOR TO THE STAND ATTACHING THE SAW TO THE STAND ATTACHING THE BELT TO THE SAW PULLEY AND THE MOTOR PULLEY ATTACHING THE MOTOR PULLEY ATTACHING THE TABLE TO THE SAW ATTACHING THE BLADE TO THE SAW INSTALLING THE TABLE INSERT ATTACHING THE ON / OFF SWITCH TO THE STAND OPERATION OPERATIONAL CONTROLS AND ADJUSTMENTS STARTING AND STOPPING THE SAW LOCKING SWITCH IN THE OFF POSITION TILTING THE TABLE ADJUSTING THE 90 DEGREE TABLE STOP SETTING THE ADJUSTABLE STOPS ADJUSTING THE BLADE TENSION TRACKING THE BLADE VERTICAL ADJUSTMENT OF THE UPPER BLADE GUIDE ASSEMBLY ADJUSTING THE UPPER BLADE GUIDES AND BLADE SUPPORT BEARING ADJUSTING LOWER BLADE GUIDES AND BLADE SUPPORT BEARING CUTTING CURVES TROUBLESHOOTING GUIDE MACHINE USE Page BAND SAW BLADES MAINTENANCE KEEP MACHINE CLEAN FAILURE TO START LUBRICATION PROTECTING CAST IRON FROM RUST ACCESSORIES SERVICE AND REPAIRS SERVICE Two Year Limited New Product Warranty WARRANTY To register your tool for warranty service visit our website at www.deltamachinery .com.