EnGenius Technologies DURAFON-1X manual Advanced Operations, Handset Registration

Advanced Operations

Handset Registration

1.If your handset(s) is purchased as part of a system, it has been pre- registered with the base station at the factory.

2.If Handset ID reads “00,” that means it is a new handset or the ID has been erased. You need to register the handset with the base station.

pressing the REG button. The handset has a 12 second registration timeout starting from the registration or de- registration option has been selected. The base and handset will automatically exit registration mode after timeout.

2.When you conduct the registration procedure with BASE 20, the handset ID will be ranging from 21 to 29.

3.Up to 4 bases can be installed to form a sub-multiple line system.

4.Repeat registration or de-registration process if unsuccessful.

Handset Group Subscription

3. Registration:
a.	Press MENU-6 to enter the registration mode
b.	Press and hold the base’s Registration (REG)
	button for 2 seconds until 4 LEDs light up.
c.	Press handset key “1”, this completes the
	registration process. When you register the
	handset to BASE 10, the base will assign a
	handset ID between 11 and 19. The assigned ID
	will be displayed on the handset LCD, indicating
	successful registration.

­ 11

Main Menu: ÇÈ

5.Settings

6.Registration

­ 11

Registration: ÇÈ

1.Register

2.Deregister

1.Up to nine handset groups (01-09) can be defined and handsets can decide which group(s) they want to be in.

2.For example, Group 1 represents the Customer Service Group, Group 2 represents the Sales Group, and Group 3 is the Marketing Group. Suppose that Handset 11 wants to receive incoming rings for all Sales and Marketing related calls. Then handset 11 will need to “subscribe” to Group 2 and Group 3.

d.	Repeat above steps for all additional handsets.
e.	The first two handsets registered will be given ID
	11 and 12, which gives them administrator
	privileges.

3. Group Selections:
a.	Press handset Menu-5 to enter the handset
	setting menu
b.	Press number “2”, handset enters group select
	menu.

­ 11

Settings: ÇÈ

1.Dial Prefix

2.Group Selection

4. De-registration:

a. You can de-register a handset from a base. De-registration will

reset the Handset ID to 00, erase the system security code, and free

up the old ID for future registration.

b. After deregistration, the handset will not be able to use the base to

make or receive phone calls, nor can it intercom other handsets.

c. Press		ADD	soft key and enter two-digit group
	number	(01	-09) to add membership in a group.
d.	Repeat for all desired groups.
e.	Delete group selections by pressing			DELETE
	(Right) soft key and enter group number.

­ 11

Groups

ADD DELETE

c.	Press handset Menu (Right) soft key.
d.	Press the handset number key “6”, this will enter the handset
	registration menu.
e.	Press and hold the base’s REG button for 2 seconds until 4 LEDs
	come on.
f.	Press the handset number key “2”, this completes the de-
	registration process. Upon successful de-registration, the handset
	will show ID “00”.

Notes:

1.The base has a 30 second registration timeout starting from

Notes:

1.The handset can change group affiliations at any time.

2.The base (administrator) is not responsible for group assignments. Consequently, it cannot de-subscribe a handset from a group.

Registration of Additional Base

1.DuraFon 1X can be installed as the multiple base configurations: up to 4 base units can be registered. The BASE 10 serve as the master base.

~29~ ~30~