EnGenius Technologies DURAFON-1X manual Phonebook Operations

b.Press 1 to enter Tone selection

c.You can adjust the dial mode between Tone and Pulse.

d.The default setting is Tone.

b.Press 4 and then enter two digits ID number to be assigned. You will see “Saving Configuration” and a Done confirmation.

2. Flash		­ 11
a.	Press Menu-9 and enter the two-digit base ID to	Flash(msec): ÇÈ
	enter the System mode.	1. 100
		2. 200
b. Press 2 to enter Flash selection
c.	You can adjust the flash time from 100ms to 900	­ 11

Phonebook Operations

1.You can store up to 30 entries in the phonebook. Each entry can contain a phone number or handset ID (up to 28 digits) and a name (up to14 characters).

­ 11

Main Menu: ÇÈ

1.KeyGuard

2.PhoneBook

ms (9 levels to choose from.) For example, press DONE

“2” if the desired flash time is 200ms. You will see

“DONE” once you finish the setting.

d. The default setting is 600ms.

Notes: If the base station is adjunct to a PBX system, it is recommended to adjust the flash time of DuraFon 1X to match the PBX spec.

2.	To access phonebook, press menu follow by “2” or
	¿or À scrolling key when handset in standby mode.
3.	To add a new entry:
	a. Press	ADD	soft key.
	b. Enter a phone number when LCD prompts
	“Number?” Use			DELETE	soft key to delete the
	last digit entered.			Press	SAVE	when completed.
	c. You will then be prompted				to enter a name for the

­ 11

ADD OPTION

­ 11

Number?

SAVE DELETE

3. Xfer PBX

a. This function is useful if the base station attached

to the PBX system through either the analog port

or the Digital Adaptor. Press Menu-9 and enter the

­ 11

System: ÇÈ

2. Flash

phone number just entered.

(1) Press SAVE key to enter a phone number without

a name. All records without naming will be placed

on top of the list, in the order they are entered.

­ 11

Name?

Caps = *

SAVE DELETE

	two-digit base ID to enter the System mode.
b.	Press 3 to enter Xfter PBX setting mode
c.	Use ¿or À scrolling key to switch between ON
d.	and OFF. The default setting is OFF.
	Select ON and press	SAVE	key
e.	You can key in the specific		“call transfer” feature
	code and press OK to confirm the setting. For
	example, if your PBX is N brand, you need to key
	in “Flash”+”*”+”70” as the call transfer code.
f.	You will see a “DONE” confirmation.

3. Xfter PBX

­ 11

	Xfer PBX:	ÇÈ
	On
	SAVE
­ 11
	Xfer Code:	ÇÈ
	Flash*70
	O K	DELETE

(2)To enter the name, press the corresponding keypad number one or more times according to the order of the character on the key.

(3)Use DELETE soft key to delete the last character entered. When completed, press SAVE soft key to confirm your selection.

Notes:

1.	When enter a phone number, the cursor automatically advances to the next
	digit field. Use ¿or À scrolling key to move the cursor backward or forward
2.	to insert or delete.
	When entering a name, the cursor automatically advances to the next
	character field if you press a different key for the next character. If you need
	to enter consecutive characters from the same key, you can wait for the

Notes: Since the base station is adjunct to a PBX system, you need to adjust the flash time of DuraFon 1X to match the PBX spec and then program the “call transfer” code.

4. Set next Handset ID to be assigned

a. This function is useful if you want to assign a
	­ 11
designed handset ID to a specific handset. Press
		Please enter
Menu-9 and enter the two-digit base ID to enter		Ext. #:**
the administration mode.		CANCEL

	cursor to advance or use ¿or À scrolling key to move the cursor backward
3.	or forward manually. Also use ¿or À to move the cursor to insert or delete.
	By default, all letters are entered in the upper case. Use the * key to toggle
4.	between upper and lower cases.
	A “Pause” entry represents a 2.8 second delay in dialing the following digits,
	which is useful when calling a sequence of segmented numbers (e.g., access
	code, credit card number, auto-attendant entries, etc.) Pause is entered by
	pressing the * key twice (LCD displays P). Entering pause twice (PP) will
	result in 5.6 seconds pause in the dialing.

~33~ ~34~