b.Sends a Flash signal to phone line to retrieve a dial tone after the call ends, or to perform the call waiting feature provided by local phone companies during a call.
4.2-WAY/INTERCOM
a.Places an intercom call to another handset ID or a group ID (group paging).
b.Intercom calls are digital, full duplex, and are conducted without the assistance from the base.
5.BROADCAST
a.Half duplex broadcasting to handsets for immediate announcement
b.Half duplex broadcasting to base stations
[please refer to page 23 for detail operation]
6.Left/Right Soft Keys
a.Make menu selection.
7.Up(¿) /Down(À) Scrolling Keys
a.Scroll through records and menu selections.
b.Adjust receiver voice volume when in Talk mode.
8.END; On/Off Key
a.Ends a call.
b.Leaves current menu operation, up one level.
c.Press for 3 seconds to off the power
Additional Handset Features
1.Multiple handsets registration
a.Up to 9 handsets can be registered to a base station; up to 36 handsets can be accommodated to the system
b.ID
c.ID
2.Ringer / Vibrator
a.
b.Four ringer type selections
3.Caller ID
a.Displays incoming call phone number and name on the LCD (needs Caller ID service from local telephone company)
4.Call Waiting with Caller ID
a.Displays 2nd incoming call information on the same phone line when 1st call is in progress (needs Call Waiting with Caller ID service from local telephone company)
5.Name Tagging with Caller ID
a.Matches the Caller ID with the phone book entries; once matched, the LCD screen will display the name or nickname instead of pure Caller ID info (needs Call Waiting with Caller ID service from local telephone company)
6.DND (Do Not Disturb, i.e., Silent Ring)
7.Three Call Logs
a.Called Log: Stores 10 phone numbers (up to 28 digits each) dialed most recently. Can perform
b.Received Call Log: 10 entries
c.Missed Call Log: 10 entries
d.Phone numbers and names can be saved into phonebook while in display.
8.Call Barring
a.Block the users from dialing the long distance calls or international calls
b.Up to 5 digits of each call barring setting; up to 4 entries allowed
c.If you need to dial a specific number to retrieve the dial tone, you need to key in that number while setting the call barring
[Note] you need to key in the accurate user ID and password to perform this feature. The default password is 0000.
~11~ | ~12~ |