EnGenius Technologies DURAFON-1X manual Administrator Features

9.Any Key Answer (except END, Silent Soft Key)

10.Key-guard

11.Dialing Prefix

a.Up to 14 digits, including pause(s), one access code can be pre- programmed to be added automatically in front of the dialed number when dialing from call logs, phonebook, and dial-and-send dialing.

12.Call Hold

a.Places call on hold

b.Battery Hot Swap: Change battery while call is on hold.

13.Mute

14.Phonebook

a.30 entries, each stores a phone number or handset ID (up to 28- digit) and name (up to14-character)

b.Alphabetically sorted display and search by letter

c.Dial from display

d.During the stand-by mode, you can enter the phonebook by pressing ¿orÀ scrolling key

15.Key Tone

a.Three-level key-tone volume selections (high/low/off)

b.Four key-tone type selections

16.Call Timer

a.Display call time duration for current call during and immediately after the call

17.Text Messaging:

a.Editing Message: from a handset, users can edit the short text message for up to 50 characters. Up to 5 messages can be edited and stored.

b.Sending Message: In view mode, handset can send a message to another handset or a group of handsets.

c.Incoming Message: A distinctive tone alerts an incoming message. The message will stay on LCD display for 8 seconds and then is saved in memory. A total of 5 incoming messages can be saved.

18.Programmable PBX Options

a.Allows user to pre-program the most frequently used PBX features along with feature codes into DuraFon which is adjunct to the PBX system.

b.Up to 9 entries can be saved.

c.Once the feature and feature codes are programmed, user can quickly perform those functions during the call by pressing the OPTION soft key.

Administrator Features

Handsets 11 and 12 are designated administrators. Both have the same authority to perform base station administrative functions from their handset menu selections. No password is required.

1.Supports both DTMF and Pulse dialing

a.From an administrator handset (Handset 11 or 12 ), press MENU-9-1 to select Tone or Pulse dialing mode.

b.Default is Tone dialing.

2.Administrator programmable Flash key timing

a.From an administrator handset (Handset 11 or 12), press MENU-9-2- 4 to select flash key timing

b.9-level (100 ms - 900 ms) timing selections, default= 600 ms.

c.The default value (600 ms) works in most areas. Changing this setting may result in Flash function not working. Change only when you are certain of the new value would work.

3.Call Transfer to PBX Extension

a.When install the DuraFon 1X is installed behind a PBX system, you can pre-program the feature code of call transfer function.

b.Need to adjust the Flash time to match your PBX setting.

~13~ ~14~