Multi-Function Gigabit Wireless-N Client Bridge Version 1.0
114
Topology In frastructure
Operation Mode Access Point + WDS AP/Client Bridge/Repeater/ WDS Bridge/Client
Router/AP Router
LAN • DHCP Server
• DHCP Client
WAN
(Client Router /AP Router
mode)
• PPPoE
Router • NAT/ NAPT
VPN VPN pass-through (PPTP, L2TP, IPSEC)
Wireless • Wireless Mode – 11b / 11g / Disable
• Channel Selection (Setting varies by Country)
• Transmission Rate
11 b/g:108, 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 in Mbps
• Transmit output power control
• Signal Strength
• RSSI indicator bar (CB/ CR/ Repeater Mode)
• Antenna Diversity
Security • WEP Encryption-64/128bit
• WPA Personal (WPA-PSK/WPA2-PSK using TKIP or AES)
• WPA Enterprise (WPA-EAP/WPA2-EAP using TKIP)
• 802.1x Authenticator
• 802.1x Supplicant- TTLS
• Hide SSID in beacons
• Multiple SSID with 802.1q VLAN tagging (up to 4 SSIDs)(AP mode)
• MAC Filter(AP mode)
• L2 isolation(AP mode)
QoS • WMM
Configuration Web-based configuration (HTTP)/Telnet
Firmware Upgrade • Upgrade firmware via web-browser
• Keep latest setting when f/w update
Administrator Setting • Administrator password change
Reset Setting • Reboot (press 1 second)
• Reset to Factory Default (press 5 seconds)
System monitoring Status, Statistics and Event Log
SNMP V1, V2c
MIB MIB I, MIB II
Backup & Restore Settings through Web
Environment & Physical