11b/g Wireless Long Range Multi-function 7+1 AP Version 1.2
94
Click on the Browse button and then select the appropriate firmware and then click
on the Upgrade button.
Note: The upgrade process may take about 1 minute to complete. Do not power off
the device during this process as it may crash the device and make it unusable. The
device will restart automatically once the upgrade is complete.
Click on the Time Settings link under the Management menu. This page allows you
to configure the time on the device. You may do this manually or by connecting to a
NTP server.
Manually Set Date and Time: Specify the date and time
Automatically Get Date and Time: Select the time zone from the drop down list and
then specify the IP address of the NTP server.
Click on the Apply button to save the changes.
Click on the Log link under the Management menu. The Log page displays a list of
events that are triggered on the Ethernet and W ireless interface. This log can be
referred when an unknown error occu rs on the system or when a report needs to be
sent to the technical support department for debugging purposes.