EnGenius Technologies ECB3500 user manual Snmp Settings

11b/g Wireless Long Range Multi-function 7+1 AP Version 1.2

￿Name: Specify a user name into the first field.

￿Password: Specify a password into this field and then re-type the password into the Confirm Password field.

￿Remote Management: Choose to enable or disable remote management.

￿Remote Upgrade: Choose to enable or disable remote firmware upgrade.

￿Remote Management Port: Specify a port for remote management. For example, if you specify 8080, then you will need to specify <ip address>:<port> 192.168.1.1:8080 to connect to the web interface of the device.

￿Click on the Apply button to save the changes.

8.6.2 SNMP Settings

￿Click on the SNMP Settings link under the Management menu. This option allows you to assign the contact details, location, community name and trap settings for SNMP. This is a networking management protocol used to monitor network-attached devices. SNMP allows messages (called protocol data units) to be sent to various parts of a network. Upon receiving these messages, SNMP-compatible devices (called agents) return data stored in their Management Information Bases. .

￿SNMP Enable/Disable: Choose to enable or disable the SNMP feature.

￿Contact: Specify the contact details of the device.

￿Location: Specify the location of the device.

￿Read-Only Community Name: Specify the password for access the SNMP community for read only access.

￿Read-Write Community Name: Specify the password for access to the SNMP community with read/write access.

￿Send SNMP Trap: Specify the IP address of the computer that will receive the SNMP traps.

￿Trap Community Name: Specify the password for the SNMP trap community.

￿Click on the Apply button to save the changes.

92