EnGenius Technologies ECB3500 user manual Wireless

11b/g Wireless Long Range Multi-function 7+1 AP Version 1.2

6.4 Wireless

￿Click on the Wireless link on the navigation drop-down menu. You will then see four options: Wireless Network, WDS Link Settings, WDS Security, and Wireless Advanced Settings. Each option is described below.

6.4.1 Wireless Network

￿The Wireless Network page allows you to configure the wireless mode, channel, SSID, and security settings.

￿Wireless Mode: Depending on the type of wireless clients that are connected to the network, you may select B, G, B/G-mixed, and SuperG. If you are not sure about which clients will be accessing the wireless networks, it is recommended that you select B/G-mixedfor the best performance.

￿Channel: Select a channel from the drop-down list. The channels available are based on the country’s regulation. When selecting Infrastructure mode, a channel is not required, however, when selecting Adhoc mode, you must select the same channel on all points.

￿SSID: The SSID is a unique named shared amongst all the points of the wireless network. The SSID must be identical on all points of the wireless network and cannot exceed 32 characters. You may specify an SSID or select one from the Site Survey.

￿Click on the Apply button to save the changes.

6.4.2 WDS Link Settings

￿Click on the WDS Link Settings. On this page you can configure the WDS (Wireless Distribution System) which allows the Access Point to function as a repeater.

55