Sony HBD-E370/E470/ E570/E870/T57 service manual Optical Device KEM-460AAA, Wire Flat Type

HBD-E370/E470/E570/E870/T57

2-12. OPTICAL DEVICE (KEM-460AAA), WIRE (FLAT TYPE)

Note: Please prepare the thin wire (clip etc.).

4chuck holder assy (D)

1 two screws	3 two claws
(BVTP 2.6)
2 two claws
	qa insulator
7 two float screws (S)	qs optical device	qh ffc holder (rear)
	(KEM-460AAA)	qk wire (flat type)
		(45 core)
	qa insulator
qa insulator	9	qg
	8
5 Insert the thin
	0
wire (clip etc.).		qd non-halogene tape
	qf wire (flat type) (5 core)
		qj wire (flat type)
		(9 core)
	qa insulator

6

loading assy (D)

– Bottom view –

‡Installation of wire (flat type) (45 core) and wire (flat type) (9 core)

Note: This illustration sees the loading assy (D) from bottom side.

3 wire (flat type) (9 core)	1 wire (flat type) (45 core)
4 Through the hole.	Fold.
	2 Through the hole.	7 two claws
		5 ffc holder (rear)
	boss	7 three claws
terminal face		6
Under the guide.	terminal face
loading assy (D)

Under the guide. (Fold area)

boss

17