Sony HBD-E370/E470/ E570/E870/T57 Optical device KEM-460AAA replacement Flow of replacement

3.Optical device (KEM-460AAA) replacement Flow of replacement:

Note: The photo in flow is an image.

Barcode label on new optical device (KEM-460AAA) bottom side

Take photo (JPEG) by digital camera

Change photo into the text data with the barcode decoder

HBD-E370/E470/E570/E870/T57

Save the text data to USB memory (memory capacity need not be 8GB)

Connect USB memory with rear USB connector on this set, and read the text data by the service mode

Procedure:

1.Remove the INSULATOR (4 pieces) and broken optical de- vice (KEM-460AAA) from LOADING ASSY.

2.Take photo of the barcode on new optical device (KEM- 460AAA) bottom side by digital camera.

3.Assemble the INSULATOR (4 pieces) to new optical device (KEM-460AAA), fix (Torq0ue value: 2 kgf) it to LOADING ASSY with screw, and assemble this set.

4.Drag & drop the taken photo by step 2 to “BDBUDec.exe”, and make the text data (File name: BuData.txt).

5.Save the text data to USB memory.

6.Connect USB memory with rear USB connector on this set, and turn the power on.

Rear USB connector

7.Press the [FUNCTION] button to select “BD/DVD”.

8.Press the buttons on the remote commander in order of [RETURN], [0], [2], [1], [SUBTITLE], and enter the service mode.

9.Press the buttons on the remote commander in order of [8], [1], [ENTER], and execute “[1] Drive OP data Write”.

10.Turn the power off after writing the OP data.

11.Turn the power on, and enter the service mode again.

12.Press the buttons on the remote commander in order of [8], [7], [3], [ENTER], and the dIOP value is displayed.

13.Confirm value is the following specification value, and turn the power off.

Specification value:

BD : 6 mA

DVD/CD : 9 mA

14.Turn the power on, confirm playback performance of the BD (BLX-104)/DVD (HLX-513)/CD (HLX-A1).

15.Completely assemble this set, and complete the repair.

7