Sony HBD-E370/E470/ E570/E870/T57 Chuck Holder Assy Loading Assy HOLDER, FFC Rear, Rear Chassis

HBD-E370/E470/E570/E870/T57

NOTE THE BD DRIVE (BPX-5) PARTS REPLACING

The mechanism blocks except optical device of BD drive (BPX-5) are chiefly composed of the following parts.

•CHUCK HOLDER ASSY

•LOADING ASSY

•HOLDER, FFC (REAR)

These parts are produced by two venders, it is not compatible. Therefore, CHUCK HOLDER ASSY and LOADING ASSY are supplied by one pair as repair parts. Please exchange both CHUCK HOLDER ASSY and LOADING ASSY at the same time.

HOLDER FFC (REAR) need not be exchanged at the same time.

Note: The laser caution label is not pasted to LOADING FOR SERVICE (Part No. A-1750-926-A). Please peel off an original laser caution label, and paste it to LOADING FOR SERVICE when you use

LOADING FOR SERVICE.

LASER CAUTION LABEL

LOADING FOR SERVICE

CHUCK HOLDER ASSY

NOTE OF REPLACING THE THE IC3100, IC3200 AND IC3400 ON THE MAIN BOARD AND THE COMPLETE MAIN BOARD

When IC3100, IC3200 and IC3400 on the MAIN board and the complete MAIN board are replaced, it is necessary to spread the compound (THERMAL COMPOUND (G747)) (Part No. J-2501- 221-A ) between parts and heat sink.

Spread the compound referring to the figure below.

– MAIN Board (Component Side) –

IC3100 IC3200 IC3400

LOADING ASSY

IC3100

IC3200

IC3400

	HOLDER, FFC (REAR)
MODEL IDENTIFICATION
– Rear Chassis –
	Part No.
Model	Part No.
E370: AEP and UK models	4-161-684-1[]
E370: US model	4-161-685-1[]
E370: Canadian model	4-161-685-2[]
E470: Canadian model	4-161-686-1[]
E570: US model	4-161-684-3[]
E870: Canadian model	4-161-684-5[]
E870: AEP and UK models	4-161-686-5[]
T57: US model (for Costco)	4-161-686-0[]

8