
HBD-E370/E470/E570/E870/T57
13. Drive
This menu is used to operate the drive using
Screen 1: Selecting items under *Service Menu
(Screen 1)
Service Menu
[1]Diag
[2]Log
[3]Factory Initialize
[4]Network
[5]Version Up
[6]System Information
[7]EMC Test Mode
[8]Drive
Screen 3: *Drive OP data Write
Purpose: Write OP data into flash IC
[M]/[m] | Move the cursor up and down |
[3] | Start the selected cursor item |
[RETURN] Returns to the top menu of the service mode
(Screen 3)
Drive OP data Write Insert USB StorageDevice...
Remove DISC and Close tray. [1]Disc: Eject
[ENT] Start
Screen 2: Selecting items under *Drive
(Screen 2)
Drive
[1]Drive OP data Write
[2]Servo Parameter Check Menu [3]Servo Signal Check Menu [4]S - Curve Check Menu [5]Readability Check Menu [6]OP Position Check Menu [7]OP Check Menu
[8]Load Eject Aging
[9]Spindle Control Check Menu [10]FA Test Mode
Screen 4: *Servo Parameter Check Menu (Not Used)
(Screen 4)
Servo Parameter Check Menu
[1]Disc: Eject
[2]Show Parameters
Operation:
[M]/[m] | Move the cursor up and down |
[3] | Open the selected cursor item |
[RETURN] Returns to the top menu of the service mode
•Test item list
[1]Drive OP data Write
[2]Servo Parameter Check Menu
[3]Servo Signal Check Menu
[4]
[5]Readability Check Menu
[6]OP Position Check Menu
[7]OP Check Menu
[8]Load Eject Aging
[9]Spindle Control Check Menu
[10]FA Test Mode
Not used for the servicing.
Press the [RETURN] button if having entered this mode.
Screen 5: *Servo Signal Check Menu (Not Used)
(Screen 5)
Servo Signal Check Menu
[1]Disc: Eject
[2]Servo Signal Monitor out: OFF
[3]RTADJ: OFF
[4]FocusBias: 0000
[5]SA
[6]Pl Level: 0000
[7]RF Level: 0000
[8]TRV Level: 0000
[9]Current FB: 0000 SA: 0000
Not used for the servicing.
Press the [RETURN] button if having entered this mode.
24