EnGenius Technologies ECB3500 user manual 109

11b/g Wireless Long Range Multi-function 7+1 AP Version 1.2

9.6.1 Administration

￿Click on the Administration link under the Management menu. This option allows you to create a user name and password for the device. By default, this device is configured without a user name and password admin. For security reasons it is highly recommended that you create a new user name and password.

￿Name: Specify a user name into the first field.

￿Password: Specify a password into this field and then re-type the password into the Confirm Password field.

￿Remote Management: Choose to enable or disable remote management.

￿Remote Upgrade: Choose to enable or disable remote firmware upgrade.

￿Remote Management Port: Specify a port for remote management. For example, if you specify 8080, then you will need to specify <ip address>:<port> 192.168.1.1:8080 to connect to the web interface of the device.

￿Click on the Apply button to save the changes.

9.6.2 SNMP Settings

￿Click on the SNMP Settings link under the Management menu. This option allows you to assign the contact details, location, community name and trap settings for SNMP. This is a networking management protocol used to monitor network-attached devices. SNMP allows messages (called protocol data units) to be sent to various parts of a network. Upon receiving these messages, SNMP-compatible devices (called agents) return data stored in their Management Information Bases. .

109