11b/g Wireless Long Range Multi-function 7+1 AP Version 1.2
79
1. Status: Displays the overall status, wireless client list, DHCP client table, and event
log.
2. System: This menu includes the system properties.
3. Router: This includes WAN, LAN, and VPN settings.
4.
Wireless: This menu includes status, basic, advanced, and security.
5.
Management: This menu includes the admin setup, SNMP, time settings, log,
firmware upgrade, and save/restore backup.
Click on the Status link o n the navigation drop-
down menu. You will then see four options: Main,
Wireless Client List, DHCP Client Table and
System Log. Each option is described in detail
below.
Click on the Main link under the Status drop-down menu. The status that is
displayed corresponds with the operating mode that is selected. Information such as
operating mode, system up time, firmware version, serial number, kernel version and
application version are displayed in the ‘System’ section. LAN IP address, subnet
mask, and MAC address are di splayed in the ‘LAN’ section. In the ‘Wireless se ction,
the frequency, chan nel is displayed. Since this device supports multiple-SSIDs, the
details of each SSID, such as ESSID and its security settings are displayed. The
‘WAN” section displays the MAC address, connection type, interface, IP address,
and subnet mask.