Enterasys Networks 2000 manual Pin Hssi connector

Installing the Hardware

Figure 24 shows the pin positions in the 50-pin HSSI connector.

25	1
50	26

Figure 24. 50-pin HSSI connector

The Enterasys Dual HSSI line card uses standard copper twisted-pair cable with identical 50-pin HSSI connectors at each end to attach to a CSU/DSU module.

To attach the segment cables to your Dual HSSI line card:

1.Obtain a Enterasys 50-pin HSSI connector cable (part number SYS-HSSI-CAB) and connect either end of the HSSI connector cable to the XP WAN interface you wish to use.

2.Plug the remote end of the connector cable into the HSSI CSU/DSU data port you wish to use.

Enterasys Xpedition 2000 Getting Started Guide 41