Enterasys Networks 700 UPS Uptime, Line Voltage, Battery Output, Battery Capacity, Test Results

The MultiSwitch 700 Device View

UPS ID

Displays the manufacturer and model typecode of the UPS attached to the COM port of the MultiSwitch 700. You must assign this typecode for the UPS window to be active. (See Setting the UPS ID, on page 2-46, for instructions for setting the typecode for your UPS.) The valid typecodes are:

•Model 370

•Model 400

•Model 600

•Model 900

•Model 1250

•Model 2000

•Matrix 3000

•Matrix 5000

•SU 700

•SU 1400

•SU 2000XL

•Other

UPS Uptime

Displays the number of hours that the UPS has been operating since the last time it was started up.

Line Voltage

Displays the voltage coming through the line attached to the MultiSwitch 700.

Battery Output

Displays the amount of battery output voltage.

Battery Capacity

Displays the percentage of remaining battery capacity (100% indicates a fully charged battery).

Test Results

Displays the result of the last self-test performed by the UPS. The possible test results are:

Unit OK	The UPS unit is in working order.
Unit Failed	The UPS unit has failed the self-test. Check the
	unit for damage or consult your UPS User’s
	Manual.
Bad Battery	The UPS unit battery is bad.
No recent test	No UPS self-test has been performed in the last
	five minutes.
Unit in test...	The UPS is currently in test mode.
Please standby

Managing the Module 2-45