Enterasys Networks B2G124-24 Console Port Pinout Assignments, MGBIC-02 Specifications 1000BASE-T

Console Port Pinout Assignments

MGBIC-02 Specifications (1000BASE-T)

Table A-11 MGBIC-02 Specifications

Item	Specification
Supported Cable:
Type	Copper, Category 5 UTP
Maximum Length	Up to 100 meters
Connector	RJ45
Data Rate	1 Gbps, IEEE 802.3:2000 compatible
	1000BASE-T operation only
	Automatic crossover detection
TX Output impedance	100 ohms, typical at all frequencies between 1 MHz and 125 MHz
RX Input impedance	100 ohms, typical at all frequencies between 1 MHz and 125 MHz

Console Port Pinout Assignments

The Console port is a DB9 serial communications port for local access to Local

Management. Refer to Figure A‐1 for the Console port pin assignments.

Figure A-1 Console Port Pinout Assignments

Â

5 9

Á

À 1 6

1	Pin 2,	Received Data (input)	3 Pin 5, Signal Ground
2	Pin 3,	Transmitted Data (output)	All other pins not connected.

Enterasys SecureStack B2 Installation Guide A-7