Enterasys Networks VH-4802 manual Factory Defaults, Factory Default Settings

Factory Defaults

Table 1-4 lists the default settings for switch configuration parameters. Each parameter can be changed via the console menus or Telnet.

Table 1-4. Factory Default Settings

Parameter	Default Value
Multicast Filtering
GMRP	Disabled
IGMP Multicast Filtering	Disabled
Port Configuration
Flow Control	Disabled
Speed and Duplex	Auto
Admin	Enabled
Broadcast Storm Control	Enabled - 500 pps
Port Priority
Default Ingress User Priority	0
Spanning Tree Algorithm
Active Aging Time	300
Bridge Priority	32768
Forward Delay	15
Hello Time	2
Max Age	20
Path Cost	4 - 1000Mbps ports
	19 - 100Mbps ports
	100 - 10Mbps ports
Port Priority	128
Spanning Tree Protocol	Enabled
System Configuration
Management VLAN	All
BootP Enable	Disabled
Password	<none>
Screen Timeout	10 min
Send Authentication Fail Traps	Enabled
SNMP Community Name	public, private
Terminal Baud Rate	Auto
User Names	admin, guest

12 Product Overview VH-4802