2. INSTALLATION
Inspecting Your Shipment
When you receive the shipment of your switch, check the package contents and make sure you have the following items:
•
•Mounting ears and mounting screws
•Four rubber feet
•ESD wrist strap
•Power cord
•
•Product documentation
Site Requirements
Before you install the switch, make sure the site meets the following requirements:
•Mounting
Provide a flat table, shelf surface, or an optional 19 in. (48.3 cm) equipment rack.
Use an EIA standard equipment rack that is grounded and physically secure.
•Power source
Provide a power source within six feet (1.8 m) of the installation location. This source must provide 100 VAC to 240 VAC at 50 Hz to 60 Hz, for 90 VA minimum power. Power specifications for the switch are shown in Appendix A, “Technical Specifications.”
Primary voltage selection within the above ranges is automatic and requires no user action.
9033630 | Installation 17 |
