Enterasys Networks XSR-3020 manual

Optional: Configuring Remote Auto Install

virtual-template 1 pppoe limit per-mac 10

+This is an optional command.

pppoe limit max-sessions 32000

+This is an optional command.

interface GigabitEthernet1/0/0 no ip address

negotiation auto

!

interface GigabitEthernet1/0/0.10 encapsulation dot1Q 20

pppoe enable

pppoe max-sessions 10

+Optional. This command enables PPPoE and allows PPPoE sessions to be created through this sub-interface.

!

interface Virtual-Template1 ip unnumbered loop 0

mtu 1492

peer default ip address pool pool1 ppp authentication pap

ip helper-address 192.168.72.118

+This is the address of the TFTP server.

ip directed-broadcast

+This command configures the virtual template interface.

!

ip local pool pool1 192.168.0.1 192.168.0.100 username 0000019876543210 password 0 0000019876543210

+Enter the remote XSR’s serial number.

aaanew-model

!

aaa authentication ppp default local ! look at local database first aaa authentication ppp dialins local

+ Specifies the IP local pool to use for address assignment.

When the RAI process begins, the remote XSR displays the following messages:

**************** PRESS ANY KEY TO TERMINATE REMOTE AUTO INSTALL ***************

Phase 2 - ADSL - searching for pvc's ...Training (60 sec)

+The XSR begins training with the DSLAM, waiting 60 seconds.

Phase 2 - ADSL - searching for pvc's ...Training (54 sec)

Phase 2 - ADSL - searching for pvc's ...

+Training is successful, discovery of VPI/VPCs begins.

Phase 2 - ADSL - searching for pvc's ...vpi/vci (0/0)

+The XSR looks for PVC 0/0 and higher.

Phase 2 - ADSL - searching for pvc's ...vpi/vci (0/38)

+The XSR looks for PVC 0/38 and higher.

Phase 3 - ADSL - trying to connect on 0/35 with snap PPPoE

+PVC 0/35 is found, SNAP PPPoE encapsulation is applied and authentication tried if required.

Phase 3 - ADSL - waiting for IP to connect (54 sec)

3-6 Software Configuration