Frame Relay WAN Link with PPP Backup Sample Configuration
Apply QoS
+Adds a FR map class and acquires FR Map Class mode
+Sets this map class’ CIR rate at 48000 bits per second
+Sets this map class’ committed burst size to 4000 bits
+Sets this map class’ excess burst size to 3000 bits
+Enables BECN (traffic shaping) for this map class
+Attaches this policy to the map class
+Adds another FR map class and acquires Frame Relay Map Class mode
+Sets this map class’ CIR rate at 30,000 bits per second
+Sets this map class’ committed burst size to 5000 bits
+Sets this map class’ excess burst size to 3000 bits
+Enables BECN (traffic shaping) for this map class
+Attaches this policy to the map class
+Adds another Frame Relay map class and acquires Frame Relay Map Class mode
+Sets this map class’ CIR rate at 50,000 bits per second
+Sets this map class’ committed burst size to 4000 bits
+Sets this map class’ excess burst size to 1000 bits
+Enables BECN (traffic shaping) for this map class
+Attaches this policy to the map class
Configure OSPF Routing
XSR(config)#router ospf 1
+Enables OSPF with a router ID and acquires Router mode
+Configures the area ID for the specified network
+Configures another area ID for the specified network
Configure More Access Lists
The following ACLs deny any packets to or from network 192.168.1.15 as they enter or leave FastEthernet 1 interface, and permit traffic to or from subnet 192.168.2.xx while denying any other traffic.