Enterasys Networks XSR-3020 manual

Bootrom Monitor Mode Commands

ff

This command formats the Flash file system. We recommend that you first save any .dat,

.cert, .cfg, and your startup-configfiles to cflash: or a PC since any files in flash: will be deleted. You are prompted to enter data by the following script:

XSR-3020: ff

You will lose all files in the “flash:” file system.

Are you sure you want to format the “flash:” file system? (y/n) y Unlocking flash file sectors

Initializing DOS file system. Formatting flashrom file system

...................................................... Done.

Set working directory to flash:

Using default Bootrom password. The system is not secure!!!

Use “bp” to change password

ffc

This command formats the CompactFlash card.

ng

This command retrieves a file over the network using a remote IP address/file path.

np

This command modifies network parameters. You are prompted to enter data by the following script. While most of the options are self-explanatory, three require further description.

•When set to no, the Autoboot option places the prompt in Bootrom mode when you boot or power up the XSR.

•When set to yes, the default Quickboot action of delaying five seconds at startup for you to optionally enter CTRL-C and acquire Bootrom mode is negated. You can still acquire Bootrom mode, but you must immediately press CTRL-C upon seeing the X-Pedition Security Router Bootrom header.

•The default hostname (local target name), XSR-3000, cannot be changed. In the absence of a user-supplied hostname via the hostname CLI command, this name will be used as the CLI prompt and SNMP hostname in MIB-II.

XSR-3020: np

Enter ‘.’ = clear a field; ‘-’ = go to previous field; ^C = quit

Local IP address	(192.168.1.1)	:
Gateway IP address	()	:
Remote Host IP address (192.168.1.10)		:
Remote file path (c:\)		:
Use TFTP (no)		:
Ftp userid (anonymous)		:
Ftp password ()		:

3-38 Software Configuration