Manuals / Enviro / Household Appliance / Stove

Enviro 1700, 1200 owner manual Removal of right pod

Models: 1700 1200

1 48
Download 48 pages 14.89 Kb
Page 38
Image 38

Installation

REMOVAL OF THE SHROUDS - INSERT:

Figure 49: Removal of right pod.

1.If the surround panel is installed, remove it by lifting the panel straight up then out.

2.For the right shroud, twist the handle on the air control clockwise to remove it from the rod.

3.Pull unit forward a few inches, if possible.

4.The shrouds can be removed one of two ways:

a.For the first method, pull the inside edge of the shroud straight out, approximately 3⁄4” (2cm), in order to unhook the shroud from unit. Pull the shroud out through the side.

b.For the second method (recommended for the right shroud), remove the two (2) T-20 screws that hold the shroud to the unit (shown in Figure 49). Pull the shroud out through the side.

5.To install the shroud, follow steps 1 through 4 in reverse order. Ensure the shrouds are hooked behind both screws on either side.

INSTALLATION OF THE DECORATIVE PLATES - INSERT:

1. Remove the shroud from the unit (refer to “REMOVAL OF THE SHROUDS -

INSERT”)

2. Remove the fan from the left shroud (refer to ”FAN REMOVAL - INSERT”)

3. Unfasten the two (2) nuts that secure the plate to the shroud. The nuts should only be hand-tightened but a 5/16” wrench may be required.

4. Remove the old plate and replace with a new decorative plate.

5. Hand-tighten the two (2) nuts back into place.

6. Re-install the fan into the left shroud.

7. Re-install the shrouds onto the unit.

Figure 50: Changing

decorative plate.

38

Page 37 Page 39
Page 38
Image 38
Enviro 1700, 1200 owner manual Removal of right pod
Page 37 Page 39

1700, 1200 specifications

The Enviro 1200 and 1700 are innovative solutions in the world of air treatment and environmental control. Designed to cater to industrial and commercial needs, these models are pivotal in enhancing air quality and promoting energy efficiency.

One of the main features of the Enviro 1200 is its advanced filtration system. It utilizes a multi-stage filtration process that includes pre-filters, HEPA filters, and activated carbon filters. This combination ensures the capture of particulate matter, volatile organic compounds (VOCs), and other airborne contaminants, providing cleaner and healthier air. The Enviro 1700, while similar in filtration capabilities, boasts a larger capacity, making it suitable for bigger spaces or industrial applications.

Both models incorporate smart sensor technologies that monitor air quality in real-time. These sensors provide data on pollutant levels, allowing for dynamic adjustments to the filtration strength. This not only optimizes performance but also reduces energy consumption, making the Enviro series both eco-friendly and cost-effective. The adaptive response of these systems ensures that users always breathe cleaner air without unnecessary energy expenditure.

Another defining characteristic of the Enviro 1200 and 1700 is their user-friendly interface. These units are designed with digital controls, allowing for easy programming and monitoring. Users can set specific operating schedules and track air quality trends over time. Additionally, both models come equipped with WiFi connectivity, enabling remote control via a smartphone app. This feature allows users to adjust settings or receive alerts about air quality levels from anywhere.

In terms of durability, both the Enviro 1200 and 1700 are constructed with high-quality materials that ensure long-lasting performance. They are designed to operate quietly, reducing the noise levels often associated with air treatment systems. This makes them suitable for a range of environments, from offices and homes to industrial settings.

In summary, the Enviro 1200 and 1700 stand out in the air treatment market due to their state-of-the-art filtration, smart technology integration, and user-centric design. These features, combined with their robust build quality, make them a reliable choice for anyone looking to improve air quality while maintaining energy efficiency.