Enviro C-10124 owner manual Limited Lifetime Warranty

Warranty

Limited Lifetime Warranty

Covers manufacturer’s defects on exterior stainless steel components, namely the cart panelling & doors, the hood, condiment bins and handles against perforation (excluding surface corrosion); for part replacement or repair and labour for the first year and part replacement from then on to the original purchaser. It also covers the stainless steel burners for part replacement or repair and labour for the first year and part replacement from then on to the original purchaser.

10 Year Warranty

Covers manufacturer’s defects on steel components, namely the cart, panelling & doors, the hood, condiment bins and handles, against manufacturers defect; for part replacement or repair and labour for the first year and part replacement for the remainder of the ten years to the original purchaser. It also covers manufacturer’s defects on manifold and valves, knobs and burner housing, for part replacement or repair and labour for the first year and part replacement for the remainder of the ten years to the original purchaser.

5 Year Warranty

Covers manufacturer’s defects on axle, hinges, magnets etc.; for part replacement or repair and labour for the first year and part replacement for the remainder of the five years to the original purchaser.

1 Year Warranty

Covers manufacturer’s defects on painted surfaces, Rotisserie, Electronic ignition system, Casters and Wheels Porcelain coating on cooking grills and griddle and all remaining parts for part replacement or repair and labour for the first year to the original purchaser.

Exclusions

Sear Plates are not covered by this warranty.

Labour: costs are controlled. Please see the Schedule of warranty labour rates sheet.

All materials if damage is caused by scratching, marring, abrasive cleaners, over-firing, grease pan fire, commercial use, surface corrosion, misuse, lack of maintenance and any discoloration due to heat or with age. On painted steel surfaces, any surface corrosion should be removed and all surfaces coated to prevent further corrosion, as part of a normal maintenance procedure. Failure to do so will result in loss of any further warranty on these parts.

29