Assembly Instructions
Your ENVIRO BISTRO will require some assembly. Please do not use a drill to modify any component, it is not necessary. Inspect all components for damage before assembly begins. If damage is present, please contact your local dealer or a courier company. Replace the damaged components with original manufacturer’s parts, no substitutions will be permitted. Do not commence construction if components are damaged or missing.
The Cart assembly and Main Engine have been
TOOLS REQUIRED:
● 1⁄4” socket or nut driver | ● 5/32” Allen key (supplied) | ● 7/16” wrench or adjustable wrench | |
●11/16” wrench or adjustable wrench | ● 3⁄4” wrench or adjustable wrench | ● Hammer or mallet | |
CART COMPONENTS: |
|
|
|
● | ● (2) | Plated caster assemblies | ● Aluminum axle and (2) end caps |
● (2) Stainless steel axle mount | ● (2) | BBQ wheels | ● (2) Shelf gussets |
● Side shelf | ● Side shelf top | ● (30) 1⁄4” x 1⁄2” stainless steel bolts | |
● (30) 1⁄4” stainless steel lock washers | ● (20) 1⁄4” stainless steel nuts | ● 5/32” Allen key | |
Figure 4
The components shown in Figure 5 should be found in the larger box.
Most of the stainless steel components are covered with plastic to prevent scratching the unit during assembly. This can be removed
Once the cart assembly has been removed from the packaging, open the doors and remove all the objects from inside of the cart. The cart will look similar to Figure 4.
There should be a small box, a large box, the aluminum axle and some packaging materials.
Figure 5
5
