Secondary Installation
Figure 44: First Stage Log Set Installation.
Figure 45: Second Stage Log Set Installation.
Figure 46: Third Stage Log Set Installation.
Figure 44: Shows the back log plus the two (2) small log twigs. Put the large back log in first, making sure the locator pins line up with the cutout sections on the log. There are two (2) pins with ledges and a single ledge on the back log. The back log sits on two (2) supports attached at the rear of the firebox. The two (2) small twigs are placed under the grate and they should be rotated so they cover up the least number of small burner ports.
Figure 45: Shows the left/center log in place. The left/center log is placed on the other two (2) pins connected to the burner pan and the straight part rests on the grate connecting the andirons. There are notches on the bottom of the left/center log to help position the log correctly.
Figure 46: The right log rests on the right pin and ledge of the back log and the floor of the firebox.
32
