| Installation |
|
|
|
|
DIMM Module Installation
Figure 3 displays the notch marks and what they should look like on your DIMM memory module.
DIMMs have 168-pins and two notches that will match with the onboard DIMM socket. DIMM modules are installed by placing the chip firmly into the socket at a 90 degree angle and pressing straight down (figure 4) until it fits tightly into the DIMM socket (figure 5).
LEFT KEY ZONE | CENTER KEY ZONE |
(UNBUFFERED) | (3.3 V DRAM) |
| Figure 3 |
Figure 4
DIMM Module clip before installation
Page
