Epson 1730W Shutting Down the Projector, Power, Power, Power, Search, Press the, Source Search, 4.Close the A/V Mute slide, You see a confirmation message

note

Lamp life results will vary depending on mode selected, environmental conditions, and usage.

Turn off this product when not in use to prolong the life of the projector.

Shutting Down the Projector

This projector incorporates Instant Off technology. To turn it off, you can press its PPower button as described below, unplug it, or turn off a power switch that supplies power to the projector. You don’t have to wait for the projector to cool off first.

1.To turn off the projector, press the PPower button on the remote control or projector.

You see a confirmation message.(If you don’t want to turn it off, press any other button.)

2.Press the PPower button again. The projection lamp turns off and you can unplug the power cord.

If you want to turn the projector on again, make sure the orange PPower light is not flashing, then press the PPower button.

3.If you extended the adjustable front foot, press up on the foot release lever to retract it.

4.Close the A/V Mute slide.

note

To focus and adjust the image, see page 22. If a projected image fails to appear, see page 19 for help.

Selecting the Image Source

Selecting the image source lets you switch between images input from different pieces of connected equipment (such as a computer or DVD player).

If you don’t see the image you want, press the Search button on the remote control or the Source Search button on the projector until you see the image you want to project.

18Displaying and Adjusting the Image