note

If Direct Power On is enabled, the power cable is connected, and a power outage occurs, the projector will start when the power is restored.

Do not use the projector at altitudes above 7500 ft (2,286 m).

■Operation

Use this menu to enable the following functions:

Direct Power On to have the projector start when the power cable is connected (without pressing the PPower button).

Sleep Mode to have the projector turn off automatically if it is idle (and no signal is received) for the amount of time you select as the Sleep Mode Timer (1 to 30 minutes).

Lens Cover Timer to have the projector turn off automatically after 30 minutes when the A/V Mute slide is closed.

High Altitude Mode to increase cooling when you are using the projector above 4900 ft (1500 m).

■Link 21L

Enables the projector to work with Link 21L software (not supported in all regions).

■Projector ID

Lets you selectively operate two or more projectors in the same room using one remote control. See page 37 for more information.

■Multi-screen

Lets you match the color and brightness levels of two or more projectors used in the same room. See below for more information.

■Language

Select from nine languages to be used for the projector menus.
64Fine-Tuning the Projector