Epson 1730W Adjust the, The image is blurry, If still images are jittery, turn on the, ■Adjust the focus using the focus ring (see page 23)

■Keep your computer and video cables away from the power cord as much as possible to prevent interference.

■The video signal may be split between the computer and the projector. If you notice a decline in the projected image quality when the image is displayed simultaneously on your notebook computer and the projector, turn off the notebook’s LCD display.

■Make sure the correct input signal is selected in the Signal menu (see page 55).

■If still images are jittery, turn on the Progressive setting in the Signal menu (see page 55).

The image is blurry.■There may be dirt or smears on the lens. Clean the lens as described on page 68.■Adjust the focus using the focus ring (see page 23).

■Make sure the lens is not fogged by condensation. You may need to wait before using the projector after moving it from a cold environment to a warm environment.

■Make sure the projector is facing the screen squarely.

■Adjust the Sharpness setting on the Image menu (see page 53). When you change video settings, you should be able to see the effect on the screen immediately. If you’re projecting from a computer, you may also need to adjust the tracking and sync as described in the next section. If you don’t like the new settings, you can always select Reset to return to the factory default settings.

You see vertical bands or the image still looks blurry after trying the solutions in the previous section.

■If you’re projecting from a computer and displaying an image that contains a lot of fine detail, you may notice vertical bands or some of the characters may look heavy or blurred. Press the Auto button on the remote control to reset the projector’s tracking and sync settings.

Solving Problems 83