note

If a button is pressed longer than 30 seconds, the remote control stops operating to conserve power. When you release the button, normal operation resumes.

Using the Remote Control

Follow these tips for using the remote control:■Point the remote control at the front of the projector or at the screen.■Stand within 20 feet of the projector.

■Avoid using the remote under bright fluorescent lamps or in direct sunlight, or the projector may not respond properly.

cautionWhen replacing batteries, take the following precautions:

■Replace the batteries as soon as they run out. If the batteries leak, wipe away battery fluid with a soft cloth. If fluid gets on your hands, wash immediately.

■Do not expose batteries to heat or flame.■Dispose of used batteries according to local regulations.

■Remove the batteries if you won’t be using the projector for a long period of time.

Replacing the Batteries

Replace the batteries as described below:1.Turn the remote control over.2.Press the tab on the battery cover to open it.3.Install two AA batteries, inserting the + and – ends as shown.4.Close the cover, pressing it down until it snaps into place.
28Using the Remote Control