DUST PORT
1.Align the four holes on the dust port (A) Fig. 17, with the four tapped holes (B) on the side of the belt sander.
2.Place a 17/64" flat washer on a
3.NOTE: If this machine is to be used with a dust collection system, slide the 4" O.D. hose connector over the dust port as shown in Fig. 18.
AB
B
Fig. 17
Fig. 18
SANDING SPINDLE
1.Release latch lever (A) Fig. 19 on the belt guard.
A
Fig. 19
11
