Epson 31-396 instruction manual Operations, Shows sanding with the miter gage

4.Your miter gage is equipped with a plate (E) Fig. 47, which fits into the T-Slot groove in the table. This allows the miter gage to be pulled off the front edge of the table without falling.

E

Fig. 47

OPERATIONS

The Oscillating Edge Sander can be used to perform many different sanding operations. The following examples will show some of the applications that this machine can be used for.

1. Fig. 48 shows sanding with the fence.

Only use the fence when the belt sander is at 0 degrees to the table

Fig. 48

2. Fig. 49 shows sanding with the miter gage.

Fig. 49

3.Fig. 50 shows sanding at 0 degrees to the table with out the fence.

Fig. 50

19