Epson 31-396 COVER

COVER

1. Align the hinges (A) Fig. 14, on the cover, with the

hinges (B) on the belt guard.

Fig. 14

Fig. 15

2. Insert hinge pins (C) and (D) Fig. 15, through the

hinges on the cover and belt guard.

Fig. 16

3. Tap the hinge pins in with hammer and rod

(supplied).

4. Latch lever (E) Fig. 16 to the cover.

Contents

Main INSTRUCTION MANUAL Oscillating Edge Sander (Model 31-396) SAFETY GUIDELINES - DEFINITIONS GENERAL SAFETY RULES ADDITIONAL SAFETY RULES FOR ABRASIVE FINISHING MACHINES SAVE THESE INSTRUCTIONS. Refer to them often and use them to instruct others. POWER CONNECTIONS MOTOR SPECIFICATIONS GROUNDING INSTRUCTIONS EXTENSION CORDS FOREWORD MINIMUM GAUGE EXTENSION CORD FUNCTIONAL DESCRIPTION UNPACKING AND CLEANING Page OSCILLATING EDGE SANDER PARTS ASSEMBLY BELT BACK STOP COVER DUST PORT SANDING SPINDLE Page Page FENCE OPERATING CONTROLS AND ADJUSTMENTS STARTING AND STOPING OSCILLATING EDGE SANDER LOCKING SWITCH IN THE OFF POSITION BELT TABLE HEIGHT TABLE DISTANCE TO BELT ANGLE OF BELT SANDER BELT TRACKING FENCE MITER GAGE SPINDLE SANDER TABLE OPERATIONS STORAGE MAINTENANCE LUBRICATION REMOVING THE DRUM Two Year Limited Warranty PARTS, SERVICE OR WARRANTY ASSISTANCE ACCESSORIES The following are trademarks of PORTER-CABLE PORTER-CABLE DELTA SERVICE CENTERS (CENTROS DE SERVICIO DE PORTER-CABLE DELTA) Delta ms cercano. Delta deben obtenerse ponindose en contacto con cualquier distribuidor Porter-Cable Delta products should be obtained by contacting any Porter-Cable Delta Distributor, Authorized Service Center, or Porter-Cable