Manuals / Brands / Power Tools / Sander / Epson / Power Tools / Sander

Epson 31-396 OPERATING CONTROLS AND ADJUSTMENTS

1 24

OPERATING CONTROLS AND ADJUSTMENTS

The power switch is located on the left side of the

machine. To turn the machine “ON” press the green start

button (A) Fig. 31. To stop the machine, push the red

stop button (B).

There is a stop button located at the top of the belt

cover. To stop the machine, push the red stop button (C)

Fig. 32.

Fig. 31

Fig. 32

Fig. 33

IMPORTANT: When the machine is not in use, the switch

should be locked in the OFF position using a padlock (C)

Fig. 33, with a 3/16" diameter shackle to prevent

unauthorized use.

DISCONNECT MACHINE FROM POWER

SOURCE.

1. Loosen ratchet handles (A) and (B) Fig. 34.

Fig. 34

Contents

Main INSTRUCTION MANUAL Oscillating Edge Sander (Model 31-396) SAFETY GUIDELINES - DEFINITIONS GENERAL SAFETY RULES ADDITIONAL SAFETY RULES FOR ABRASIVE FINISHING MACHINES SAVE THESE INSTRUCTIONS. Refer to them often and use them to instruct others. POWER CONNECTIONS MOTOR SPECIFICATIONS GROUNDING INSTRUCTIONS EXTENSION CORDS FOREWORD MINIMUM GAUGE EXTENSION CORD FUNCTIONAL DESCRIPTION UNPACKING AND CLEANING Page OSCILLATING EDGE SANDER PARTS ASSEMBLY BELT BACK STOP COVER DUST PORT SANDING SPINDLE Page Page FENCE OPERATING CONTROLS AND ADJUSTMENTS STARTING AND STOPING OSCILLATING EDGE SANDER LOCKING SWITCH IN THE OFF POSITION BELT TABLE HEIGHT TABLE DISTANCE TO BELT ANGLE OF BELT SANDER BELT TRACKING FENCE MITER GAGE SPINDLE SANDER TABLE OPERATIONS STORAGE MAINTENANCE LUBRICATION REMOVING THE DRUM Two Year Limited Warranty PARTS, SERVICE OR WARRANTY ASSISTANCE ACCESSORIES The following are trademarks of PORTER-CABLE PORTER-CABLE DELTA SERVICE CENTERS (CENTROS DE SERVICIO DE PORTER-CABLE DELTA) Delta ms cercano. Delta deben obtenerse ponindose en contacto con cualquier distribuidor Porter-Cable Delta products should be obtained by contacting any Porter-Cable Delta Distributor, Authorized Service Center, or Porter-Cable