8.Insert an envelope into the manual feed slot with the wide end at the top entering the printer first and the printable side face-up until it meets resistance. The printer loads the envelope to the print position automatically.

9.Now give your print command. The printer ejects the envelope automatically when it is finished printing.

Note:

Q . Make sure your application program keeps the printing entirely within the printable area of the envelope. For a description of the printable urea, see the Appendix.

QUse envelopes only under normal temperature and humidity conditions.

0If the ink is not drying fas t enough, try removing envelopes one at a time as they finish printing.

When you switch back to the paper feeder, move the paper-thickness lever back to its normal position. To do this, first press the Pause button to turn the Pause light on. Next hold down the Replace ink (Alt) button until the carriage moves to the middle position. Then turn the paper-thickness lever all the way to the left (counterclockwise).

Using Other Printer Functions 2-5