Paper handling
The printer does not print; the Paper Out and Pause lights are on.No paper is loaded in the printer. Load paper in the paper feeder or from the manual feed slot; then press the Pause button to set the Pa use light off.
Single sheets do not feed properly from the paper feeder.Too many sheets are loaded in the paper feeder. Remove the paper from the paper feeder and reload up to 100 sheets.
The paper is too thick or too thin to be fed. Make sure that the paper you are using meets the specifications. Some paper types require manual feeding. See “Technical Specifications” in the Appendix.
The printer loads more than one sheet at a time.The paper is too thin. Make sure that the paper you are using meets the specifications. Some paper types require manual feeding. See “Technical Specifications” in the Appendix.
The ejected paper is wrinkled.The paper is too thin or is damp. Make sure that the paper you are using meets the specifications. See “Technical Specifications” in the Appendix. Do not store your paper in a damp or humid environment.