Mixed text/graphics mode

This feature is for software that has problems printing scalable font text combined with graphics. Leave the mixed text/graphics mode set to off unless you notice problems in your printout.

Auto line feed

When the auto line feed feature is on, each carriage return (CR) code is accompanied by a line feed (LF) code. If your printed text is unexpectedly double-spaced, set this feature to off. If text lines print on top of each other, set it to on.

Loading position

When you want to print more lines on a page, set this feature to 3 mm. For example, with ACsize paper and the loading position set to 8.5 mm, you can print 65 lines per page with l/6 inch line spacing, but with the 3 mm setting you can print 66 lines. If you set the top margin in your software, that setting is added to the default-setting value.

Changing the default settings

To change the printer’s default settings, you use the control panel buttons; the control panel lights show your selections.

Follow the steps below to make your changes:1.Make sure the printer is turned off and paper is loaded in the paper feeder.

2.Hold down the Pause button and turn on the printer to enter the default-setting mode.

-

Using Other Printer Functions 2-13