Epson 420i CORRECTINCORRECT, 2.Insert the form as done for path 2 of Fig, 3.Move the tractor lock lever upward. (Fig. 11)

Note 1: Recommended paper position is shown below.CORRECTINCORRECT

Failure to position the paper correctly as shown above may result in a paper jam.

Note 2: The head adjustment lever on the right base plate is used to find the best printing quality by shifting it back and forth in line with the paper thickness.

Bottom Feed Tractor Paper Setting

The bottom feed tractor paper setting is illustrated as path 2 in Fig. 7. Because the form is fed in from the bottom, a special type of desk is required.

1.Pull the paper pressure bar forward and make sure that the friction lever is also in the forward position marked “PIN FEED”. (Fig. 9)

2.Insert the form as done for path 2 of Fig. 73.Move the tractor lock lever upward. (Fig. 11)4.Perform steps 5-8 for the rear feed tractor type (path 1).

5.Move the side stoppers, located at the bottom of the printer at the paper insertion opening, to match the width of the paper to be used.

12